Same way:ratherlongpressthe Resume buttonuntil theGREENlightflashes, then release.afterdoingthesestepsthen the printerwill return to normal. This oftenoccurswhen thecartridgeruns outcompleterefilltheninstalledagain.
Here this step by step to resetting waste ink counter printer canon iP4000 1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. Do not release the buttons. The LED light should be green to indicate that a function is selectable 2. While holding the Power button, release the Resume/Cancel button, do not release the Power button 3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange. 4. When the LED light is green, press the Resume/Cancel button 4 times. Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange. 5. Press the Power button. The LED lights in green, and the reset is performed. When the operation completes, the printer returns to the menu selection mode automatically 6. Press the power button to exit service mode.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). The printer's carriage will “reset" or move momentarily.
If the above was properly performed the printer will enter the "Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press. Next press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
refil ink or Refill Canon Inkjet is very easy for the one who know the prosedure, but if we Don't know the method , don't try because the mechine can break.
Before run adjustment program or software resetter Epson Stylus Photo R220 and R230, set date setting in your computer to 12 January 2006. Appearance of adjustment program Epson stylus photo R220 and R230 like adjustment program for Epson C45. Your Epson Stylus Photo R220 and R230 must be installed correctly in your computer before using the software otherwise so this software resetter will not be used. Here how to use the software * Download and extract downloaded software and run it. * Click accept button. * Set model name, port selection and destination setting and equal to your printer. * Click Maintenance Tab. * Check mark waste ink pad counter. * And the clear the protection counter (reset counter to zero) * Then click Ok, Ok * done
Reset Waste Ink 1) Enter SERVICE MODE. By pressing Menu, Copy, Scan, Copy, Copy 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Set] key. 7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button. 3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection) 4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset. The number of the Reset button pressing LED Function Remarks 0 time Green Power off 1 time Orange Service pattern print 2 times Green EEPROM print 3 times Orange EEPROM reset 4 times Green Waste ink counter reset 5 Turn off the printer.( it must be turn off)and then turn it on again.
Reset Waste Ink Canon MPC190 1) Enter SERVICE MODE.--- By pressing Menu Copy Scan Copy Copy 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Set] key. 7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let Resume button go. 4. Press Resume button 2 times then let BOTH buttons go. 5. Green lights will flash and then stop blinking. 6. When green lights are solid, press the Resume button 4 times. 7. Press the Power button and the printer should turn off, if not, press the Power button once more. 8. Your printer should respond as normal.
The Canon iP3500 Canon iP3500 inkjet Photo Printer's design is simple and straightforward. The black-and-silver printer stands 17.2 inches wide, 11.9 inches deep, and 5.7 inches tall, and it weighs 10.8 pounds. The control panel is basically nonexistent. The only features on the front of the printer are the power and cancel/feed buttons and a PictBridge-enabled USB port.
Canon iP3500 inkjet Photo Printer Basic Features: • Maximum 4800 x 1200 color dpi with microscopic droplets as small as 2 picoliters • 4 individual ink tanks with FINE Technology for long lasting, photo lab quality results • Fast borderless 4" x 6" photo in approx 47 seconds • Built-in dual paper trays for quick and instant paper selection • New "Easy-PhotoPrint EX software for a variety of printing needs
Canon iP3500 inkjet Photo Printer Features: Photo printing Enjoy photo lab quality prints with fine detail and smooth colour gradations, thanks to 2pl ink droplets and a high 4800x1200dpi* print resolution.
Print a 10x15cm borderless photo in approx. 47 seconds in Standard Mode*. Print photos directly from your PictBridge-ready digital camera or camcorder.
Auto Image Fix automatically enhances your photos. Apply Red Eye Removal, face brightening and more with the image editing software.
ChromaLife100** delivers beautiful, long-lasting prints with longevity up to 100 years.
Document printing Print documents perfectly at up to 25ppm in mono or 17ppm in colour. Whether homework, paperwork, weekend work or web pages, this printer handles it all.
Single Inks All 4 Single Ink tanks can be replaced separately, minimising ink wastage and maximising savings. A smart LED light flashes to alert you when a colour is running low or needs replacement.
Efficiency Two paper trays hold photo and plain paper. Quick-Start gets your PIXMA going fast, with instant use of functions. Easy-PhotoPrint EX software makes every stage of operation easier.
Operating systems Windows and Mac OS X compatible.
1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)
3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.
4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)
5) Press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)
Canon PIXMA iP1000 Waste Ink Counter Reset Manual for Service mode 1. Turn off the printer. And disconnect the printer cable. 2. Press and hold the POWER button, turn on the printer. 3. The indicator (L.E.D.) should be green. 4. Press and release the RESUME button , the indicator (L.E.D.) should be orange. 5. Press and release the RESUME button again, the indicator (L.E.D.) should be green. 6. Release both buttons.
Any idea how to fix it? The symptoms, besides displaying error #357, are: - print head does not move when I open or close the front panels(needed when replacing ink cartridges) - Message "Check printer. Press OK" - Alarm indicator flashes
