Reset MP390 Waste Ink Full Tank

The below reset procedure worked for me. I did not have to clean the waste-ink sponge. Many thanks to lp who originally posted it and to "Anonymous" who reposted it.

1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset

2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button

The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set

Then press Stop/Reset Followed by the power button and then wait for it to restart.

iP Tool : Download
EEPROM Printer Canon ip6210D/6220D/MP170/MP450/2200/ip600 Download
MPTool MP150/MP160/MP170/MP180/MP450/MP460 Download
Step By Step Resetter canon MP Download

canon IP4200

Try this methods to reset Printer iP4200


Hope it can help you.

Good luck

Cannon 2200/3300 Imagerunner HDD failure e602 error

The machine has a error code 602-0003

E602
1) Are the connection and the cable of the connector (J1017) on the main controller PCB and the connector (J1551) on the hard disk drive normal? NO: Correct the cable connection.Hard disk drive (HDD), Main controller PCB
2) Try replacing the hard disk drive and downloading the system software.Is the problem corrected?
YES: End. NO: Replace the main controller PCB.
3) HDD unit.
Remove the rear upper cover and the reader rear cover. Remove the three screws, and detach the cover, Remove the two screws and disconnect the two connectors then, remove the HDD unit. Remove the six screws and detach the HDD When mounting the HDD unit,be sure that the flat cable is under the plastic sheet of the HDD upper case.

Reset Ink Counter Canon Pixma iP1000

Here's some tips for your Canon Pixma IP1000. I have two IP1000 printer, one is broken because the head need to be replaced, but the other is still powerful. I like this printer because the simple operational
the low budget, the one that I like most is the fast printing.
The problem that I have when using this printer is when the ink waste absorber is full, and he start to blink. Ok guys, Here's some tips for you who still use this printer.

Reset waste ink tank counter CANON PIXMA iP1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

If your IP1000 Blinking try this Tips :
Step 1: Manual for Service mode
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 2 : Software for Permanant
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now work normally

Notes. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink watse absorber overflow...

Downloadh The Software General Tool canon Pixma iP1000

Driver Canon PIXMA IP1000 Download

Reset_iP1000.pdf

Canon S450 Printer

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data

Canon PIXMA iP1000 Waste Ink Counter Reset

Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Canon Error Code, E013, E014, E015, E016, E017, E018, E019, E020

E013
•The PLL lock is released because waste toner motor is locked up,etc.
•The micro switch employed to detect clogging of waste toner is activated.
•The waste toner case is detected full.
E014
•The PLL lock of the fixing/feeding motor is released.
•Excess current of the feeding motor is detected.
E015
•Clock pulses of the pick-up/duplexing/developing motor fails to be generated or
be detected.
•Excess current of the pick-up/duplexing/developing motor is detected.
E016 Excess current of the reciprocating motor
of the photosensitive drum cleaner unit is detected.
E017 The PLL lock of the drive motor of the holding tray unit is released.
E018 The PLL lock of the drive motor of the oil removing roller is
E019 The waste toner case is detected full although it is not.
E020 The developer fails to be replenished with starter developer properly.